Description

Configured for calibrated signal transmission between proximity probes and Proximitor sensors in 3300 XL transducer systems, the Bently Nevada 330730-080-00-00 (330730 Extension Cable) provides direct electrical interconnection. The extension cable maintains the electrical characteristics required for non-contact shaft vibration and position measurement within 3300 XL 11 mm monitoring systems.

Suffix Breakdown & Model Matrix

  • 330730: 3300 XL 11 mm Extension Cable

  • 080: 8.0 m cable length

  • 00: Standard cable configuration

  • 00: Agency approval not required

Hardware Specifications

Parameter Specification
Model 330730-080-00-00
Brand Bently Nevada
Origin United States
Product Type 3300 XL 11 mm Extension Cable
Series 3300 XL 11 mm
Cable Length 8.0 m (26.2 ft)
Cable Configuration Standard Cable
System Compatibility 3300 XL 11 mm Proximity Transducer System
Measurement Application Shaft Vibration and Position Monitoring
Relative Humidity Up to 100% Non-Submerged
Construction Hermetically Sealed Case
Weight 2 kg Shipping Weight
Dimensions 8.0 m Overall Length
Operating Temp Refer to complete transducer system specification
Power Consumption Passive Cable Assembly

Gap Voltage Validation and Signal Integrity

The 330730 extension cable is a calibrated component of the 3300 XL 11 mm proximity transducer system. Proper operation requires installation with a compatible proximity probe and Proximitor sensor configured for the specified system length.

Maintaining the correct electrical length is necessary to preserve transducer calibration, linearity, and gap voltage characteristics. During commissioning, gap voltage verification is commonly performed to confirm that the probe and target operate within the calibrated measurement region, typically centered near the standard -10 VDC target used in Bently Nevada proximity measurement systems.

The cable assembly supports signal transmission while minimizing measurement deviation caused by impedance mismatch or improper system-length configuration.

Frequently Asked Questions

Q: Can the 330730-080-00-00 extension cable be used independently as a sensor?
A: No. The extension cable is only one component of the complete transducer system and must be used with a compatible 3300 XL probe and Proximitor sensor.

Q: Does cable length affect measurement performance?
A: Yes. The extension cable forms part of the calibrated electrical length of the transducer system. Correct cable length selection is required to maintain specified system performance.

Q: Is the cable suitable for high-humidity environments?
A: Yes. The assembly is specified for operation in environments with up to 100% relative humidity under non-submerged conditions and incorporates a hermetically sealed construction.

Field Installation Guidelines

  • Verify compatibility between the proximity probe, extension cable, and Proximitor sensor before installation.

  • Do not shorten, splice, or modify the extension cable assembly.

  • Route signal cables separately from power distribution and motor cables.

  • Protect cable runs from crushing, abrasion, and excessive bending forces.

  • Confirm connector engagement is fully secured before system startup.

  • Maintain shield continuity throughout the complete transducer system.

  • Verify acceptable gap voltage values during commissioning.

  • Inspect cable jackets and connectors periodically for mechanical damage.

330730-080-00-00 | Bently Nevada | 3300 XL 11 mm Extension Cable

SKU
330730-080-00-00
Manufacturer
Bently Nevada
Product Type
Extension Cable
Condition
Brand New
Payment
T/T
Shipping port
Xiamen
Warranty
12 months
Fast Worldwide Shipping

Contact us for shipping options, freight costs and estimated delivery times.

12-Month Warranty

Your purchase is covered by our 12-month supplier warranty. Contact us for warranty assistance.

30-Day Returns

Eligible products can be returned within 30 days. Contact our team to arrange your return.

Expert Support

Our team helps you check part numbers, confirm availability and answer your ordering questions.

Description

Configured for calibrated signal transmission between proximity probes and Proximitor sensors in 3300 XL transducer systems, the Bently Nevada 330730-080-00-00 (330730 Extension Cable) provides direct electrical interconnection. The extension cable maintains the electrical characteristics required for non-contact shaft vibration and position measurement within 3300 XL 11 mm monitoring systems.

Suffix Breakdown & Model Matrix

  • 330730: 3300 XL 11 mm Extension Cable

  • 080: 8.0 m cable length

  • 00: Standard cable configuration

  • 00: Agency approval not required

Hardware Specifications

Parameter Specification
Model 330730-080-00-00
Brand Bently Nevada
Origin United States
Product Type 3300 XL 11 mm Extension Cable
Series 3300 XL 11 mm
Cable Length 8.0 m (26.2 ft)
Cable Configuration Standard Cable
System Compatibility 3300 XL 11 mm Proximity Transducer System
Measurement Application Shaft Vibration and Position Monitoring
Relative Humidity Up to 100% Non-Submerged
Construction Hermetically Sealed Case
Weight 2 kg Shipping Weight
Dimensions 8.0 m Overall Length
Operating Temp Refer to complete transducer system specification
Power Consumption Passive Cable Assembly

Gap Voltage Validation and Signal Integrity

The 330730 extension cable is a calibrated component of the 3300 XL 11 mm proximity transducer system. Proper operation requires installation with a compatible proximity probe and Proximitor sensor configured for the specified system length.

Maintaining the correct electrical length is necessary to preserve transducer calibration, linearity, and gap voltage characteristics. During commissioning, gap voltage verification is commonly performed to confirm that the probe and target operate within the calibrated measurement region, typically centered near the standard -10 VDC target used in Bently Nevada proximity measurement systems.

The cable assembly supports signal transmission while minimizing measurement deviation caused by impedance mismatch or improper system-length configuration.

Frequently Asked Questions

Q: Can the 330730-080-00-00 extension cable be used independently as a sensor?
A: No. The extension cable is only one component of the complete transducer system and must be used with a compatible 3300 XL probe and Proximitor sensor.

Q: Does cable length affect measurement performance?
A: Yes. The extension cable forms part of the calibrated electrical length of the transducer system. Correct cable length selection is required to maintain specified system performance.

Q: Is the cable suitable for high-humidity environments?
A: Yes. The assembly is specified for operation in environments with up to 100% relative humidity under non-submerged conditions and incorporates a hermetically sealed construction.

Field Installation Guidelines

  • Verify compatibility between the proximity probe, extension cable, and Proximitor sensor before installation.

  • Do not shorten, splice, or modify the extension cable assembly.

  • Route signal cables separately from power distribution and motor cables.

  • Protect cable runs from crushing, abrasion, and excessive bending forces.

  • Confirm connector engagement is fully secured before system startup.

  • Maintain shield continuity throughout the complete transducer system.

  • Verify acceptable gap voltage values during commissioning.

  • Inspect cable jackets and connectors periodically for mechanical damage.

Ordering & Support FAQs

Information on product condition, availability, payment, shipping, warranty and returns.

ABB, HIMA and Emerson industrial automation modules arranged on a dark studio background.

Availability is confirmed by the complete part number and required quantity. Most confirmed in-stock items can be dispatched the same day when cleared payment is received before 2:00 PM (UTC+8). Special-order items typically require 1–3 weeks, subject to availability. Please confirm urgent dispatch with us before ordering.

Your quotation will specify the condition and packaging of the offered item. New parts are unused. “New in sealed packaging” means the original package seal is intact. For “new in original packaging” items, the seal condition is confirmed separately. Please specify any packaging or documentation requirements when enquiring.

The shipping origin depends on the stock allocated to your order and is stated in your quotation or pro forma invoice, together with the Incoterm. Freight is quoted separately based on the shipment and destination. Please provide your delivery address, postcode and contact details. Your preferred carrier or courier account can also be considered.

We accept bank wire transfers in CNY (RMB), GBP, EUR or USD. RUNTO ELECTRIC does not accept credit cards or offer credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.

RUNTO ELECTRIC provides a 12-month limited supplier warranty from the shipment date, unless your quotation or invoice states otherwise. It applies to the direct purchaser and cannot be transferred to an end customer. This is not an OEM or international manufacturer warranty. An order-specific warranty confirmation letter is available on request.

Eligible products can be returned within 30 days under our return policy. Please provide your order number and reason for return before sending the item back. Our team will confirm eligibility and provide return instructions.

Reviews & buying guides

From the tech desk