Description

The Bently Nevada 24583-04, also cataloged as the 24583 High Temp Proximitor Switch, operates as a dedicated hardware component for non-contact shaft displacement and vibration signal conversion within Bently Nevada proximity transducer systems. The device interfaces with a high-temperature probe assembly, converting eddy-current measurement data into an analog voltage signal proportional to target movement. It supports operation in elevated thermal environments while maintaining a defined transducer scale factor.

Hardware Specifications

Parameter Specification
Model 24583-04
Brand Bently Nevada
Origin United States
Product Type High Temp Proximitor Switch
Probe Diameter 50 mm (2.00 in.)
Operating Temp Up to 538 deg C (1000 deg F)
Power Supply -18 VDC to -24 VDC
Scale Factor 10 mV/mil (0.4 V/mm)
Output Signal Analog voltage proportional to displacement or vibration
Mounting Chassis mountable
Weight Approximately 0.29 kg
Power Consumption Not specified in available data

Eddy-Current Probe Scaling and Gap Validation

The 24583-04 functions as part of an eddy-current proximity measurement chain in which the probe, extension cable, and Proximitor assembly are calibrated as a matched system. The specified scale factor of 10 mV/mil establishes the relationship between target movement and output signal variation.

For installation and commissioning, transducer systems typically require verification of probe gap voltage to confirm proper target positioning and measurement linearity. In rotating machinery applications, gap validation assists in maintaining displacement measurement consistency and supports rotor dynamic analysis functions performed by associated monitoring systems.

Frequently Asked Questions

Q: Can the 24583-04 be used as a stand-alone displacement sensor?
A: No. The device is intended to operate as part of a complete proximity transducer system consisting of a compatible high-temperature probe, associated cabling, and signal conditioning electronics.

Q: Does the module provide a digital communication interface?
A: No. Available specifications indicate an analog voltage output proportional to measured displacement or vibration.

Q: What is the primary purpose of scale factor verification during commissioning?
A: Scale factor verification confirms that displacement-related voltage output corresponds to the calibrated transducer response and that the sensing chain is operating within its intended measurement range.

Field Installation Guidelines

  • Mount the unit on a mechanically stable chassis or equipment base to minimize vibration-induced wiring stress.

  • Route probe cables separately from high-voltage, motor, and variable-frequency drive conductors to reduce electromagnetic interference.

  • Maintain shielding continuity according to plant grounding standards and terminate shields at the designated instrumentation ground point.

  • Verify probe-to-target gap conditions before placing machinery into service.

  • Avoid excessive cable bending, crushing, or unsupported cable runs that may alter transducer performance.

  • Confirm supply voltage remains within the specified -18 VDC to -24 VDC range before energizing the sensing circuit.

  • After installation, validate analog output response against known shaft position or displacement conditions where practical.

Frequently Referenced Applications

  • Shaft displacement monitoring

  • High-temperature machinery position sensing

  • Rotor vibration measurement systems

  • Turbomachinery protection instrumentation

  • TSI monitoring architectures

Bently Nevada 24583-04 High Temp Proximitor Switch

SKU
24583-04
Manufacturer
Bently Nevada
Product Type
High Temp Proximitor Switch
Condition
Brand New
Payment
T/T
Weight
0.29 kg
Shipping port
Xiamen
Warranty
12 months
Fast Worldwide Shipping

Contact us for shipping options, freight costs and estimated delivery times.

12-Month Warranty

Your purchase is covered by our 12-month supplier warranty. Contact us for warranty assistance.

30-Day Returns

Eligible products can be returned within 30 days. Contact our team to arrange your return.

Expert Support

Our team helps you check part numbers, confirm availability and answer your ordering questions.

Description

The Bently Nevada 24583-04, also cataloged as the 24583 High Temp Proximitor Switch, operates as a dedicated hardware component for non-contact shaft displacement and vibration signal conversion within Bently Nevada proximity transducer systems. The device interfaces with a high-temperature probe assembly, converting eddy-current measurement data into an analog voltage signal proportional to target movement. It supports operation in elevated thermal environments while maintaining a defined transducer scale factor.

Hardware Specifications

Parameter Specification
Model 24583-04
Brand Bently Nevada
Origin United States
Product Type High Temp Proximitor Switch
Probe Diameter 50 mm (2.00 in.)
Operating Temp Up to 538 deg C (1000 deg F)
Power Supply -18 VDC to -24 VDC
Scale Factor 10 mV/mil (0.4 V/mm)
Output Signal Analog voltage proportional to displacement or vibration
Mounting Chassis mountable
Weight Approximately 0.29 kg
Power Consumption Not specified in available data

Eddy-Current Probe Scaling and Gap Validation

The 24583-04 functions as part of an eddy-current proximity measurement chain in which the probe, extension cable, and Proximitor assembly are calibrated as a matched system. The specified scale factor of 10 mV/mil establishes the relationship between target movement and output signal variation.

For installation and commissioning, transducer systems typically require verification of probe gap voltage to confirm proper target positioning and measurement linearity. In rotating machinery applications, gap validation assists in maintaining displacement measurement consistency and supports rotor dynamic analysis functions performed by associated monitoring systems.

Frequently Asked Questions

Q: Can the 24583-04 be used as a stand-alone displacement sensor?
A: No. The device is intended to operate as part of a complete proximity transducer system consisting of a compatible high-temperature probe, associated cabling, and signal conditioning electronics.

Q: Does the module provide a digital communication interface?
A: No. Available specifications indicate an analog voltage output proportional to measured displacement or vibration.

Q: What is the primary purpose of scale factor verification during commissioning?
A: Scale factor verification confirms that displacement-related voltage output corresponds to the calibrated transducer response and that the sensing chain is operating within its intended measurement range.

Field Installation Guidelines

  • Mount the unit on a mechanically stable chassis or equipment base to minimize vibration-induced wiring stress.

  • Route probe cables separately from high-voltage, motor, and variable-frequency drive conductors to reduce electromagnetic interference.

  • Maintain shielding continuity according to plant grounding standards and terminate shields at the designated instrumentation ground point.

  • Verify probe-to-target gap conditions before placing machinery into service.

  • Avoid excessive cable bending, crushing, or unsupported cable runs that may alter transducer performance.

  • Confirm supply voltage remains within the specified -18 VDC to -24 VDC range before energizing the sensing circuit.

  • After installation, validate analog output response against known shaft position or displacement conditions where practical.

Frequently Referenced Applications

  • Shaft displacement monitoring

  • High-temperature machinery position sensing

  • Rotor vibration measurement systems

  • Turbomachinery protection instrumentation

  • TSI monitoring architectures

Ordering & Support FAQs

Information on product condition, availability, payment, shipping, warranty and returns.

ABB, HIMA and Emerson industrial automation modules arranged on a dark studio background.

Availability is confirmed by the complete part number and required quantity. Most confirmed in-stock items can be dispatched the same day when cleared payment is received before 2:00 PM (UTC+8). Special-order items typically require 1–3 weeks, subject to availability. Please confirm urgent dispatch with us before ordering.

Your quotation will specify the condition and packaging of the offered item. New parts are unused. “New in sealed packaging” means the original package seal is intact. For “new in original packaging” items, the seal condition is confirmed separately. Please specify any packaging or documentation requirements when enquiring.

The shipping origin depends on the stock allocated to your order and is stated in your quotation or pro forma invoice, together with the Incoterm. Freight is quoted separately based on the shipment and destination. Please provide your delivery address, postcode and contact details. Your preferred carrier or courier account can also be considered.

We accept bank wire transfers in CNY (RMB), GBP, EUR or USD. RUNTO ELECTRIC does not accept credit cards or offer credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.

RUNTO ELECTRIC provides a 12-month limited supplier warranty from the shipment date, unless your quotation or invoice states otherwise. It applies to the direct purchaser and cannot be transferred to an end customer. This is not an OEM or international manufacturer warranty. An order-specific warranty confirmation letter is available on request.

Eligible products can be returned within 30 days under our return policy. Please provide your order number and reason for return before sending the item back. Our team will confirm eligibility and provide return instructions.

Reviews & buying guides

From the tech desk