Bently Nevada 330101-00-08-10-02-00 3300 XL 8 mm Proximity Probe

The Bently Nevada 330101-00-08-10-02-00 serves as the primary 330101 Proximity Probe utilized to execute non-contact shaft displacement measurement across Bently Nevada 3300 XL transducer system platforms. The probe features an 8 mm tip diameter, 3/8-24 UNF threaded case, 1.0 m total length, and ClickLoc coaxial connector configuration.

Suffix Breakdown & Model Matrix

The model 330101-00-08-10-02-00 represents a specific configuration within the 3300 XL 8 mm Proximity Probe family.

• 00: Unthreaded length, 0 mm

• 08: Overall case length, 80 mm

• 10: Total probe length, 1.0 m (3.3 ft)

• 02: ClickLoc connector with standard cable

• 00: Standard approval configuration

Hardware Specifications

Eddy-Current Measurement Characteristics

The probe operates as the sensing element of a 3300 XL eddy-current transducer system. It generates a signal proportional to the distance between the probe tip and a conductive target surface. Proper transducer matching with compatible extension cables and Proximitor Sensors is required to maintain calibrated system response and gap voltage performance.

Frequently Asked Questions

Q: Is the probe interchangeable with other 3300 XL system components?
A: Yes. The probe is designed for use with compatible 3300 XL extension cables and Proximitor Sensors.

Q: What is the function of the ClickLoc connector?
A: The ClickLoc connector provides a secure coaxial connection in environments subject to mechanical vibration.

Q: Does the probe contact the rotating shaft during operation?
A: No. The probe is designed for non-contact measurement of conductive targets.

Field Installation Guidelines

• Maintain the specified probe gap during installation and calibration.

• Route transducer cables separately from high-voltage power wiring.

• Protect probe cables from excessive bending and mechanical damage.

• Verify connector engagement before system commissioning.

• Perform gap voltage verification after installation.