1 3
Bently Nevada

330130-040-00-CN | Bently Nevada | 3300 XL Standard Extension Cable
SKU: 330130-040-00-CN
In stock: 15
Description

Bently Nevada 330130-040-00-CN 3300 XL Extension Cable

Configured for probe extension signal transmission in the Bently Nevada 3300 XL transducer system, the Bently Nevada 330130-040-00-CN (330130 Extension Cable) provides direct electrical interconnection between a proximity probe and its corresponding Proximitor sensor. The cable incorporates controlled capacitance, triaxial shielding, and FEP insulation to maintain the electrical characteristics required for eddy-current measurement systems used in vibration and position monitoring applications.

Suffix Breakdown & Model Matrix

The model 330130-040-00-CN consists of four defined ordering elements:

  • 330130 = 3300 XL Extension Cable

  • 040 = 4.0 m (13.1 ft) cable length

  • 00 = Standard cable configuration

  • CN = Country-specific agency approval option

Hardware Specifications

Parameter Specification
Model 330130-040-00-CN
Brand Bently Nevada
Origin United States
Product Type 3300 XL Extension Cable
Series 3300 XL Proximity Transducer System
Cable Length 4.0 m (13.1 ft)
Connector Option Standard Cable
Approval Option CN Country-Specific Approval
Cable Construction 75 Ohm Triaxial Cable
Insulation Material Fluoroethylene Propylene (FEP)
Extension Cable Capacitance 69.9 pF/m Typical
Cable Weight Density 34 g/m
Weight 0.136 kg
Shipping Weight 1.5 kg
Dimensions Length Dependent
Operating Temp Not specified
Power Consumption Passive Cable, No External Power Required

Eddy-Current Probe Signal Integrity

The 330130-040-00-CN functions as an integrated component within the 3300 XL transducer chain. Cable capacitance is controlled to support calibrated probe system operation and signal transmission between the eddy-current probe and Proximitor sensor.

The triaxial cable construction contributes to cross-talk suppression and external noise reduction within machinery monitoring installations. When installed as part of a matched transducer assembly, the extension cable supports signal transfer associated with shaft vibration, radial position, thrust position, and rotor dynamic measurements.

Frequently Asked Questions

Q: What cable length is specified by the 040 option?
A: The 040 option designates a cable length of 4.0 m (13.1 ft).

Q: What is the typical cable capacitance specification?
A: The specified typical capacitance is 69.9 pF/m.

Q: Can the cable operate as a standalone communication or measurement device?
A: No. The cable is intended for use as part of a complete 3300 XL proximity transducer system.

Field Installation Guidelines

  • Match the cable length to the transducer system specification.

  • Maintain shield continuity throughout the signal path.

  • Route away from high-voltage and motor power wiring.

  • Prevent sharp bends and excessive pulling force.

  • Verify connector engagement before system startup.