1 3
Bently Nevada

990-08-XX-01-00 | Bently Nevada | MOD: 165353-01 2- Wire Vibration Transmitter
SKU: 990-08-XX-01-00
In stock: 8
Description

Bently Nevada 990-08-XX-01-00 2-Wire Vibration Transmitter

The Bently Nevada 990-08-XX-01-00 (MOD: 165353-01 Vibration Transmitter) operates as a dedicated hardware component for converting shaft vibration measurements into a two-wire process signal within machinery protection and condition monitoring systems. The transmitter is designed for DIN-rail installation and interfaces with compatible proximity transducer systems for continuous vibration indication.

Suffix Breakdown & Model Matrix

  • Base Model: 990

  • Full Model: 990-08-XX-01-00

  • Modification Number: 165353-01

  • Product Type: 2-Wire Vibration Transmitter

  • Mounting Option: 35 mm DIN Rail Clips

  • Agency Approval Option: Not Required

Hardware Specifications

Parameter Specification
Model 990-08-XX-01-00
Brand Bently Nevada
Origin U.S.A
Shipping Weight 3 kg
Product Type 2-Wire Vibration Transmitter
Modification Number 165353-01
Mounting Method 35 mm DIN Rail Clips
Agency Approval Not Required
Function Vibration Signal Transmission and Conditioning

Gap Voltage Validation and Vibration Signal Processing

The 990 transmitter is designed to work with proximity transducer systems used for shaft vibration monitoring. In eddy-current based measurement systems, probe gap voltage verification near -10 VDC is commonly performed during commissioning to confirm operation within the calibrated measurement region. The transmitter conditions the vibration signal for integration with control and monitoring equipment.

Frequently Asked Questions

Q: What mounting method is specified for this transmitter?
A: The unit is designed for installation using 35 mm DIN rail clips.

Q: Does this model require agency approvals?
A: No. The documented configuration specifies that agency approval is not required.

Q: What is the primary function of the 990 transmitter?
A: It converts vibration measurement data from a compatible transducer system into a process-compatible output signal.

Field Installation Guidelines

  • Install the transmitter on a properly secured 35 mm DIN rail.

  • Verify compatibility with the connected proximity transducer system.

  • Route signal wiring separately from high-voltage power cables.

  • Follow site grounding practices for cable shields and instrument grounds.

  • Verify field wiring polarity before energizing the device.

  • Check transducer gap voltage during commissioning.

  • Inspect DIN rail retention clips and terminal connections after installation.