Bently Nevada 24583-03 Proximitor Sensor
The Bently Nevada 24583-03 serves as the primary 24583 Proximitor Sensor utilized to execute eddy-current probe signal conditioning and shaft displacement measurement across Bently Nevada proximity transducer platforms. The sensor accepts probe inputs, operates from a negative DC supply, and provides a calibrated voltage output for continuous shaft position, vibration, and gap monitoring functions.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 24583-03 |
| Brand | Bently Nevada |
| Product Type | Proximitor Sensor |
| Origin | Not specified in supplied data |
| Input Voltage | -18 VDC to -24 VDC |
| Output Signal | Analog DC voltage |
| Output Range | Typically -2 VDC to -18 VDC |
| Scale Factor | 10 mV/mil (0.4 V/mm) |
| Frequency Response | 0 Hz to 10 kHz |
| Compatible Probe Diameter | 50 mm (2.00 in) |
| Maximum System Cable Length | 5 m (16.4 ft) |
| Calibration Material | AISI 4140 Steel |
| Body Style | Shielded block-style housing |
| Dimensions | 3.25 x 2.50 x 2.00 in (8.26 x 6.35 x 5.08 cm) |
| Weight | 0.23 kg |
| Operating Temp | -34 deg C to 100 deg C |
| Power Consumption | Supplied from -18 VDC to -24 VDC loop |
Gap Voltage Validation and Probe Scaling
The 24583-03 is designed for use within a calibrated proximity transducer system consisting of a probe, extension cable, and Proximitor sensor. Variations in the distance between the probe tip and conductive target produce corresponding changes in the output voltage.
During commissioning, probe scaling verification is commonly performed together with gap voltage validation. For shaft monitoring channels, a static gap voltage near -10 VDC is frequently used as a reference target to position the transducer within its calibrated linear operating region. Maintaining proper gap voltage allows accurate measurement of shaft vibration, eccentricity, and rotor position.
The specified frequency response of 0 Hz to 10 kHz supports both static displacement measurements and dynamic vibration analysis within rotating machinery monitoring systems.
Frequently Asked Questions
Q: What supply voltage is required for the 24583-03?
A: The specified operating input voltage range is -18 VDC to -24 VDC.
Q: What output scaling is provided by the sensor?
A: The Proximitor sensor provides a scale factor of 10 mV/mil, equivalent to approximately 0.4 V/mm.
Q: What target material is used for factory calibration?
A: The transducer system is calibrated using AISI 4140 steel as the reference target material.
Field Installation Guidelines
- Mount the sensor on a rigid panel or chassis structure using the designated mounting points.
- Verify compatibility between the probe, extension cable, and Proximitor sensor before energizing the measurement channel.
- Maintain the maximum specified system cable length of 5 m.
- Route transducer wiring separately from motor feeders, switchgear wiring, and VFD output conductors.
- Terminate cable shields according to the machinery monitoring system grounding specification.
- Verify gap voltage and channel linearity following installation or replacement of any transducer component.
- Inspect mounting hardware periodically to ensure mechanical integrity in high-vibration environments.
Bently Nevada 24583-03 Proximitor Sensor
- SKU
- 24583-03
- Manufacturer
- Bently Nevada
- Product Type
- Proximitor Sensor
- Condition
- Brand New
- Payment
- T/T
- Weight
- 0.23 kg
- Shipping port
- Xiamen
- Warranty
- 12 months
Bently Nevada 24583-03 Proximitor Sensor
The Bently Nevada 24583-03 serves as the primary 24583 Proximitor Sensor utilized to execute eddy-current probe signal conditioning and shaft displacement measurement across Bently Nevada proximity transducer platforms. The sensor accepts probe inputs, operates from a negative DC supply, and provides a calibrated voltage output for continuous shaft position, vibration, and gap monitoring functions.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 24583-03 |
| Brand | Bently Nevada |
| Product Type | Proximitor Sensor |
| Origin | Not specified in supplied data |
| Input Voltage | -18 VDC to -24 VDC |
| Output Signal | Analog DC voltage |
| Output Range | Typically -2 VDC to -18 VDC |
| Scale Factor | 10 mV/mil (0.4 V/mm) |
| Frequency Response | 0 Hz to 10 kHz |
| Compatible Probe Diameter | 50 mm (2.00 in) |
| Maximum System Cable Length | 5 m (16.4 ft) |
| Calibration Material | AISI 4140 Steel |
| Body Style | Shielded block-style housing |
| Dimensions | 3.25 x 2.50 x 2.00 in (8.26 x 6.35 x 5.08 cm) |
| Weight | 0.23 kg |
| Operating Temp | -34 deg C to 100 deg C |
| Power Consumption | Supplied from -18 VDC to -24 VDC loop |
Gap Voltage Validation and Probe Scaling
The 24583-03 is designed for use within a calibrated proximity transducer system consisting of a probe, extension cable, and Proximitor sensor. Variations in the distance between the probe tip and conductive target produce corresponding changes in the output voltage.
During commissioning, probe scaling verification is commonly performed together with gap voltage validation. For shaft monitoring channels, a static gap voltage near -10 VDC is frequently used as a reference target to position the transducer within its calibrated linear operating region. Maintaining proper gap voltage allows accurate measurement of shaft vibration, eccentricity, and rotor position.
The specified frequency response of 0 Hz to 10 kHz supports both static displacement measurements and dynamic vibration analysis within rotating machinery monitoring systems.
Frequently Asked Questions
Q: What supply voltage is required for the 24583-03?
A: The specified operating input voltage range is -18 VDC to -24 VDC.
Q: What output scaling is provided by the sensor?
A: The Proximitor sensor provides a scale factor of 10 mV/mil, equivalent to approximately 0.4 V/mm.
Q: What target material is used for factory calibration?
A: The transducer system is calibrated using AISI 4140 steel as the reference target material.
Field Installation Guidelines
- Mount the sensor on a rigid panel or chassis structure using the designated mounting points.
- Verify compatibility between the probe, extension cable, and Proximitor sensor before energizing the measurement channel.
- Maintain the maximum specified system cable length of 5 m.
- Route transducer wiring separately from motor feeders, switchgear wiring, and VFD output conductors.
- Terminate cable shields according to the machinery monitoring system grounding specification.
- Verify gap voltage and channel linearity following installation or replacement of any transducer component.
- Inspect mounting hardware periodically to ensure mechanical integrity in high-vibration environments.
Bently Nevada 24583-03 Proximitor Sensor
RUNTOL National Day Holiday Notice and Service Arrangement
Holiday Schedule According to China’s statutory holiday calendar, the National Day holiday will be observed from October 1 to October 7, 2026. Service Commitment During this period, RUNTOL will continue...
Read more
RUNTOL Mid-Autumn Festival Customer Care and Service Commitment
Holiday Greetings From September 25 to September 27, 2026, China celebrates the traditional Mid-Autumn Festival. On this occasion of reunion, RUNTOL extends sincere wishes to our global customers. We understand...
Read more
Company News: Dragon Boat Festival Holiday Notice & Service Arrangement
About the Festival The Dragon Boat Festival, one of China’s most important traditional holidays, will be observed from June 19 to June 21, 2026. It commemorates the patriotic poet Qu...
Read more
Company News: Labor Day 2026 Holiday Notice & Service Arrangement
During the Labor Day holiday (May 1–5, 2026), RUNTOL will maintain 24/7 online service for global customers. All new orders will be shipped starting May 6.
Read more