1 3
Bently Nevada

Bently Nevada 330103-03-09-10-02-00 3300 XL 8 mm Proximity Probe
SKU: 330103-03-09-10-02-00
In stock: 10
Description

Bently Nevada 330103-03-09-10-02-00 3300 XL 8 mm Proximity Probe

The Bently Nevada 330103-03-09-10-02-00, also cataloged as the 330103 Proximity Probe, operates as a dedicated hardware component for non-contact shaft displacement measurement within 3300 XL machinery monitoring systems. Using eddy-current sensing technology, the probe measures the distance between the probe tip and a conductive target and supplies the signal to a compatible Proximitor sensor for linear voltage conversion.

Suffix Breakdown & Model Matrix

  • Base Model: 330103

  • Full Model: 330103-03-09-10-02-00

  • Product Family: 3300 XL 8 mm Proximity Probe

  • Thread Configuration: Metric

  • Mounting / Thread Option (03): Reverse Mount Probe

  • Unthreaded Length Option (03): Specific Unthreaded Case Configuration

  • Overall Case Length (09): Metric Case Length Configuration

  • Total Cable Length (10): 1.0 m (3.3 ft)

  • Connector Option (02): Miniature Coaxial ClickLoc Connector

  • Agency Approval Option (00): Standard Configuration

Hardware Specifications

Parameter Specification
Model 330103-03-09-10-02-00
Brand Bently Nevada
Origin USA
Power Consumption Not applicable (passive probe)
Product Type Proximity Probe
Product Family 3300 XL 8 mm
Probe Tip Diameter 8 mm
Thread Configuration Metric
Mounting Style Reverse Mount
Total Cable Length 1.0 m
Connector Type Miniature Coaxial ClickLoc
Measurement Principle Eddy Current
Compatible Device 3300 XL Proximitor Sensor
Measurement Function Static and Dynamic Shaft Displacement

Gap Voltage and Eddy-Current Measurement

The probe uses eddy-current sensing to detect the distance between the probe tip and a conductive shaft surface. When connected to a compatible 3300 XL Proximitor sensor, the system converts gap distance into a proportional voltage signal. During commissioning, gap voltage verification near -10 VDC is commonly used to confirm operation within the calibrated linear region for vibration and shaft position measurements.

Frequently Asked Questions

Q: Does this probe require a separate signal conditioner?
A: Yes. The probe is designed to operate with a compatible 3300 XL Proximitor sensor.

Q: What is the cable length provided by option 10?
A: Option 10 specifies a 1.0 m integral cable length.

Q: What mounting configuration is designated by option 03?
A: The 03 mounting option identifies a reverse mount probe configuration.

Field Installation Guidelines

  • Install the probe securely using the specified reverse mounting arrangement.

  • Maintain adequate clearance between the probe tip and the conductive target during setup.

  • Route probe cables separately from power and motor conductors.

  • Avoid sharp cable bends that may affect cable integrity.

  • Ground cable shielding according to the machinery monitoring system design.

  • Verify gap voltage before placing the monitored machine into service.

  • Use only compatible 3300 XL extension cables and Proximitor components.