Bently Nevada 330103-05-15-10-02-00 3300 XL 8 mm Proximity Transducer System
Bently Nevada 330103-05-15-10-02-00 3300 XL 8 mm Proximity Probe
The Bently Nevada 330103-05-15-10-02-00 is a 3300 XL 8 mm Proximity Probe used as part of the 3300 XL proximity transducer system for non-contact shaft vibration, position, and speed measurements. The probe operates with a matching extension cable and Proximitor Sensor to provide calibrated displacement measurements for rotating machinery protection and condition monitoring applications.
Product Specifications
| Parameter | Specification |
|---|---|
| Model | 330103-05-15-10-02-00 |
| Brand | Bently Nevada |
| Product Type | 3300 XL 8 mm Proximity Probe |
| Series | 3300 XL |
| Sensor Type | Eddy-Current Displacement Sensor |
| Overall Length Option | 1.5 m system length configuration |
| Connector Type | Miniature Coaxial ClickLoc Connector |
| Cable Type | Standard Cable |
| Linear Range | 2 mm (80 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil) |
| Frequency Response | 0 Hz to 10 kHz |
| Operating Temperature | -52 deg C to +177 deg C |
| Approval Option | 00 |
| System Compatibility | 3300 XL 8 mm Proximity Transducer System |
Configuration Details
The ordering code defines the mechanical and connection configuration of the probe:
- 330103: 3300 XL 8 mm proximity probe
- -05: Probe configuration option specified by the manufacturer
- -15: 1.5 m system length configuration
- -10: Miniature coaxial ClickLoc connector with standard cable
- -02-00: Approval and ordering options as specified for this model
The available source material identifies these option codes but does not provide a complete factory decoding for every suffix. Users should verify detailed suffix definitions against the applicable Bently Nevada ordering guide when exact mechanical dimensions are required.
Measurement Principle
The 3300 XL 8 mm probe uses eddy-current sensing technology to measure the distance between the probe tip and a conductive target surface. As shaft position changes, the probe signal changes proportionally, allowing precise displacement and vibration monitoring.
When combined with a compatible extension cable and Proximitor Sensor, the system delivers calibrated measurements for both static and dynamic machine conditions.
Use in Machinery Monitoring Systems
The 3300 XL transducer system supports several critical rotating machinery measurements:
- Radial vibration monitoring
- Axial shaft position measurement
- Differential expansion monitoring
- Rotational speed measurement
- Keyphasor phase reference acquisition
These measurements are commonly integrated into machinery protection and condition monitoring systems designed in accordance with API 670 requirements.
Performance Characteristics
The specified linear measurement range of 2 mm (80 mils) provides the calibrated operating span of the transducer system. Within this range, the system's nominal sensitivity is 7.87 V/mm (200 mV/mil).
With a frequency response extending from 0 Hz to 10 kHz, the probe can capture both static shaft position information and dynamic vibration signals generated by rotating equipment.
Frequently Asked Questions
Q: Can the 330103-05-15-10-02-00 be used as a standalone sensor?
A: No. The probe is designed to operate as part of a complete 3300 XL transducer system that includes a compatible extension cable and Proximitor Sensor.
Q: What measurements can this probe perform?
A: The probe supports shaft displacement, vibration, position, speed, and Keyphasor reference measurements when installed in a properly configured 3300 XL system.
Q: What is the frequency response of the transducer system associated with this probe?
A: The specified frequency response is 0 Hz to 10 kHz, allowing both static and dynamic machine measurements.
Bently Nevada 330103-05-15-10-02-00 3300 XL 8 mm Proximity Transducer System
